Optical modulators using semiconductor nano-structures - Revision history

wikademia>Dr. Eme at 18:17, 13 September 2009

2009-09-13T18:17:03Z

← Older revision		Revision as of 18:17, 13 September 2009
Line 1:		Line 1:
	== Optical modulators using semiconductor nano-structures ==		== Optical modulators using semiconductor nano-structures ==
			__NOTOC__
	An [[optical modulator]] is a optical device which is used to modulate a beam of light with perturbation device. it is a kind of transmitter to convert information to optical binary signal through [[optical fiber]] ([[optical waveguide]]) or transmission medium of optical frequency in fiber optic communication. There are several method to manipulate this device depending on the parameter of a light beam like [[amplitude modulator]] (majority), [[phase modulator]], polarization modulator etc.		An [[optical modulator]] is a optical device which is used to modulate a beam of light with perturbation device. it is a kind of transmitter to convert information to optical binary signal through [[optical fiber]] ([[optical waveguide]]) or transmission medium of optical frequency in fiber optic communication. There are several method to manipulate this device depending on the parameter of a light beam like [[amplitude modulator]] (majority), [[phase modulator]], polarization modulator etc.
	The easiest way to obtain modulation is modulation of intensity of a light by the current driving the light source ([[laser diode]]). This sort of modulation is called direct modulation, as opposed to the external modulation performed by a light modulator. For this reason, light modulators are called external light modulators.		The easiest way to obtain modulation is modulation of intensity of a light by the current driving the light source ([[laser diode]]). This sort of modulation is called direct modulation, as opposed to the external modulation performed by a light modulator. For this reason, light modulators are called external light modulators.

wikademia>Wikademia at 16:40, 17 July 2009

2009-07-17T16:40:45Z

@@ Line 1: / Line 1: @@
 == Optical modulators using semiconductor nano-structures ==
@@ Line 81: / Line 76: @@
 == References ==
 {{reflist|2}}

wikademia>Wikademia: 7 revisions

2009-06-14T21:01:27Z

7 revisions

← Older revision	Revision as of 21:01, 14 June 2009
(No difference)

wikademia>Headbomb: DO NOT remove the AfD notice. If you do not think this should be deleted, participate in the debate and voice your opinion

2009-06-09T12:27:18Z

DO NOT remove the AfD notice. If you do not think this should be deleted, participate in the debate and voice your opinion

← Older revision		Revision as of 12:27, 9 June 2009
Line 1:		Line 1:
			<!-- Please do not remove or change this AfD message until the issue is settled -->
			{{AfDM\|page=Optical modulators using semiconductor nano-structures\|logdate=2009 June 7\|substed=yes }}
			<!-- For administrator use only: {{oldafdfull\|page=Optical modulators using semiconductor nano-structures\|date=7 June 2009\|result='''keep'''}} -->
			<!-- End of AfD message, feel free to edit beyond this point -->
	{{Mergeto\|Optical modulator\|date=June 2009}}		{{Mergeto\|Optical modulator\|date=June 2009}}
	== Optical modulators using semiconductor nano-structures ==		== Optical modulators using semiconductor nano-structures ==

wikademia>SmackBot: Date maintenance tags and general fixes

2009-06-09T02:36:44Z

Date maintenance tags and general fixes

← Older revision		Revision as of 02:36, 9 June 2009
Line 1:		Line 1:
	{{~~mergeto~~\|Optical modulator}}		{{Mergeto\|Optical modulator\|date=June 2009}}
	== Optical modulators using semiconductor nano-structures ==		== Optical modulators using semiconductor nano-structures ==

Line 8:		Line 8:
	[[Optical modulators]] can be implemented using Semiconductor Nano-structures to increase the performance like high operation, high stability, high speed response, and highly compact system. Highly compact [[electro-optical modulators]] have been demonstrated in compound semiconductors.<ref>Sadagopan, T., Choi, S. J., Dapkus, P. D. & Bond, A. E. Digest of the LEOS Summer Topical Meetings MC2–-3 (IEEE, Piscataway, New Jersey (2004)</ref> However, in silicon, electro-optical modulation has been demonstrated only in large structures, and is therefore inappropriate for effective on-chip		[[Optical modulators]] can be implemented using Semiconductor Nano-structures to increase the performance like high operation, high stability, high speed response, and highly compact system. Highly compact [[electro-optical modulators]] have been demonstrated in compound semiconductors.<ref>Sadagopan, T., Choi, S. J., Dapkus, P. D. & Bond, A. E. Digest of the LEOS Summer Topical Meetings MC2–-3 (IEEE, Piscataway, New Jersey (2004)</ref> However, in silicon, electro-optical modulation has been demonstrated only in large structures, and is therefore inappropriate for effective on-chip
	integration. Electro-optical control of light on silicon is challenging owing to its weak electro-optical properties. The large dimensions of previously demonstrated structures were necessary to achieve a signiﬁcant modulation of the transmission in spite of the small change of refractive index of silicon. Liu et al. have recently demonstrated a high-speed silicon [[optical modulator]] based on a metal–oxide–semiconductor (MOS) conﬁguration<ref>Liu, A. et al. Nature 427, 615–618 (2004)</ref>. Their work showed a high-speed optical active device on silicon—acritical milestone towards [[optoelectronic]] integration on silicon.		integration. Electro-optical control of light on silicon is challenging owing to its weak electro-optical properties. The large dimensions of previously demonstrated structures were necessary to achieve a signiﬁcant modulation of the transmission in spite of the small change of refractive index of silicon. Liu et al. have recently demonstrated a high-speed silicon [[optical modulator]] based on a metal–oxide–semiconductor (MOS) conﬁguration<ref>Liu, A. et al. Nature 427, 615–618 (2004)</ref>. Their work showed a high-speed optical active device on silicon—acritical milestone towards [[optoelectronic]] integration on silicon.


	=== Electro-optic modulator of nano-structures ===		=== Electro-optic modulator of nano-structures ===
Line 16:		Line 15:
	The crystal which is covered by electrode may be considered to be a voltage-variable wave-plate. When a voltage is applied, the retardation of laser polarization of the light would be changed while a beam passes through an ADP crystal. This variation in polarization results in intensity modulation downstream from the output polarizer. The output polarizer converts the phase shift into an [[amplitude modulation]].		The crystal which is covered by electrode may be considered to be a voltage-variable wave-plate. When a voltage is applied, the retardation of laser polarization of the light would be changed while a beam passes through an ADP crystal. This variation in polarization results in intensity modulation downstream from the output polarizer. The output polarizer converts the phase shift into an [[amplitude modulation]].

	[[File:~~optical_mod1~~.jpg]]		[[File:optical mod1.jpg]]


	Micrometre-scale silicon electro-optic modulator<ref>Nature 435, 325-327 (19 May 2005)</ref>		Micrometre-scale silicon electro-optic modulator<ref>Nature 435, 325-327 (19 May 2005)</ref>

	This device was fabricated a shape of the p-i-n ring resonator on a [[silicon-on-insulator]] substrate with a 3-mm-thick buried oxide layer. Both the waveguide coupling to the ring and that forming the ring have awidth of 450 nm and a height of 250 nm. The diameter of the ring is 12 mm, and the spacing between the ring and the straight waveguide is 200 nm.		This device was fabricated a shape of the p-i-n ring resonator on a [[silicon-on-insulator]] substrate with a 3-mm-thick buried oxide layer. Both the waveguide coupling to the ring and that forming the ring have awidth of 450 nm and a height of 250 nm. The diameter of the ring is 12 mm, and the spacing between the ring and the straight waveguide is 200 nm.


Line 30:		Line 28:
	In an AOM a laser beam is caused to interact with a high frequency ultrasonic sound wave inside an optically polished block of crystal or glass (the interaction medium). By carefully orientating the laser with respect to the sound waves the beam can be made to reflect off the acoustic wave-fronts ([[Bragg diffraction]]). Therefore, when the sound field is present the beam is deflected and when it is absent the beam passes through undeviated. By switching the sound field on and off very rapidly the deflected beam appears and disappears in response (digital modulation). By varying the amplitude of the acoustic waves the intensity of the deflected beam can similarly be modulated (analogue modulation).		In an AOM a laser beam is caused to interact with a high frequency ultrasonic sound wave inside an optically polished block of crystal or glass (the interaction medium). By carefully orientating the laser with respect to the sound waves the beam can be made to reflect off the acoustic wave-fronts ([[Bragg diffraction]]). Therefore, when the sound field is present the beam is deflected and when it is absent the beam passes through undeviated. By switching the sound field on and off very rapidly the deflected beam appears and disappears in response (digital modulation). By varying the amplitude of the acoustic waves the intensity of the deflected beam can similarly be modulated (analogue modulation).

	[[File:~~optical_mod3~~.jpg]]		[[File:optical mod3.jpg]]


	Acoustic [[solitons]] in semiconductor nanostructures<ref>Journal of Physics: Conference Series 92 (PHONONS 2007)</ref>		Acoustic [[solitons]] in semiconductor nanostructures<ref>Journal of Physics: Conference Series 92 (PHONONS 2007)</ref>
Line 42:		Line 39:
	A dc magnetic field Hdc is applied perpendicular to the light propagation direction to produce a single domain, transverse directed 4~Ms. The rf modulation field Hrf, applied by means of a coil along the light propagation direction, wobbles 4~Ms through an angle of @ and produces a time varying magnetization component in the longitudinal direction. This component then produces an ac variation in the plane of polarization via the longitudinal Faraday effect. Conversion to [[amplitude modulation]] is accomplished by the indicated analyzer.		A dc magnetic field Hdc is applied perpendicular to the light propagation direction to produce a single domain, transverse directed 4~Ms. The rf modulation field Hrf, applied by means of a coil along the light propagation direction, wobbles 4~Ms through an angle of @ and produces a time varying magnetization component in the longitudinal direction. This component then produces an ac variation in the plane of polarization via the longitudinal Faraday effect. Conversion to [[amplitude modulation]] is accomplished by the indicated analyzer.

	[[File:~~optical_mod2~~.jpg]]		[[File:optical mod2.jpg]]


	Wideband magneto-optic modulation in a bismuth-substituted yttrium iron garnet waveguide<ref>Optics Communications Volume 220, Issues 4-6</ref>		Wideband magneto-optic modulation in a bismuth-substituted yttrium iron garnet waveguide<ref>Optics Communications Volume 220, Issues 4-6</ref>


	The current transient creates a time-varying magnetic field that has a component along the direction of optical propagation. This component (underneath the microstrip line) acts to tip the magnetization, M, along the propagation direction of the optical beam. A static in-plane magnetic field, by, is applied perpendicular to the light propagation direction, thus ensuring the return of M to its initial orientation after the passage of the current transient. Depending on the component of the magnetization along the z-direction, Mz, the optical beam experiences a rotation of its polarization due to the Faraday effect. The polarization modulation is converted into an intensity modulation via a polarization analyzer, which is detected by a high-speed [[photodiode]].		The current transient creates a time-varying magnetic field that has a component along the direction of optical propagation. This component (underneath the microstrip line) acts to tip the magnetization, M, along the propagation direction of the optical beam. A static in-plane magnetic field, by, is applied perpendicular to the light propagation direction, thus ensuring the return of M to its initial orientation after the passage of the current transient. Depending on the component of the magnetization along the z-direction, Mz, the optical beam experiences a rotation of its polarization due to the Faraday effect. The polarization modulation is converted into an intensity modulation via a polarization analyzer, which is detected by a high-speed [[photodiode]].


	=== Other semiconductor nanostructures of optical modulator ===		=== Other semiconductor nanostructures of optical modulator ===

	MODULATION OF THz RADIATION BY SEMICONDUCTOR NANOSTRUCTURES<ref>MICROWAVE AND OPTICAL TECHNOLOGY LETTERS / Vol. 35, No. 5, December 5 2002</ref>		MODULATION OF THz RADIATION BY SEMICONDUCTOR NANOSTRUCTURES<ref>MICROWAVE AND OPTICAL TECHNOLOGY LETTERS / Vol. 35, No. 5, December 5 2002</ref>


	As a result of increased demand for bandwidth, wireless short-range communication systems are expected to extend into the THz frequency range. Therefore the fundamental interactions between THz radiation and semiconductors are receiving increasing attention. This new quantum structure is based on the well-established technology for producing high electron mobility transistors where an electron gas is conﬁned at a GaAs/AlxGa1 xAs interface. The electron density at the hetero-interface can be controlled by the application of an external gate voltage, which in turn will alter the transmission/reﬂection characteristics of the device to an incident THz beam.		As a result of increased demand for bandwidth, wireless short-range communication systems are expected to extend into the THz frequency range. Therefore the fundamental interactions between THz radiation and semiconductors are receiving increasing attention. This new quantum structure is based on the well-established technology for producing high electron mobility transistors where an electron gas is conﬁned at a GaAs/AlxGa1 xAs interface. The electron density at the hetero-interface can be controlled by the application of an external gate voltage, which in turn will alter the transmission/reﬂection characteristics of the device to an incident THz beam.




	== Applications and Commercial products ==		== Applications and Commercial products ==


	=== Electro-optic modulator ===		=== Electro-optic modulator ===

	[[File:~~optical_mod4~~.jpg]]		[[File:optical mod4.jpg]]

	* from THORLABS		* from THORLABS


	40 Gb/s Phase Modulator		40 Gb/s Phase Modulator
Line 76:		Line 63:
	Applications ; Chirp Control for High-Speed Communications (SONET OC-768 Interfaces, SDH STM-256 Interfaces), Coherent communications, C & L Band Operation, Optical Sensing, All-optical frequency shifting.		Applications ; Chirp Control for High-Speed Communications (SONET OC-768 Interfaces, SDH STM-256 Interfaces), Coherent communications, C & L Band Operation, Optical Sensing, All-optical frequency shifting.

	[[File:~~optical_mod5~~.jpg]]		[[File:optical mod5.jpg]]

	* from Mach-40™		* from Mach-40™



	=== Acousto-optic modulator of nano-structures ===		=== Acousto-optic modulator of nano-structures ===


	Applications ; acousto-optic modulators include laser printing, video disk recording, laser projection systems.		Applications ; acousto-optic modulators include laser printing, video disk recording, laser projection systems.

			[[File:optical mod6.jpg]]
	[[File:~~optical_mod6~~.jpg]]

	* from ELECTRO-OPTICAL PRODUCTS CORPORATION		* from ELECTRO-OPTICAL PRODUCTS CORPORATION




	== References ==		== References ==
	{{reflist\|2}}		{{reflist\|2}}
	{{~~uncategorized~~\|date=June 2009}}		{{Uncategorized\|date=June 2009}}

wikademia>Headbomb: {{mergeto|Optical modulator}}

2009-06-08T20:04:35Z

← Older revision		Revision as of 20:04, 8 June 2009
Line 1:		Line 1:
			{{mergeto\|Optical modulator}}
	== Optical modulators using semiconductor nano-structures ==		== Optical modulators using semiconductor nano-structures ==

wikademia>Jmk8755 at 13:46, 8 June 2009

2009-06-08T13:46:36Z

← Older revision		Revision as of 13:46, 8 June 2009
Line 1:		Line 1:
			== Optical modulators using semiconductor nano-structures ==

	An [[optical modulator]] is a optical device which is used to modulate a beam of light with perturbation device. it is a kind of transmitter to convert information to optical binary signal through [[optical fiber]] ([[optical waveguide]]) or transmission medium of optical frequency in fiber optic communication. There are several method to manipulate this device depending on the parameter of a light beam like [[amplitude modulator]] (majority), [[phase modulator]], polarization modulator etc.		An [[optical modulator]] is a optical device which is used to modulate a beam of light with perturbation device. it is a kind of transmitter to convert information to optical binary signal through [[optical fiber]] ([[optical waveguide]]) or transmission medium of optical frequency in fiber optic communication. There are several method to manipulate this device depending on the parameter of a light beam like [[amplitude modulator]] (majority), [[phase modulator]], polarization modulator etc.

	The easiest way to obtain modulation is modulation of intensity of a light by the current driving the light source ([[laser diode]]). This sort of modulation is called direct modulation, as opposed to the external modulation performed by a light modulator. For this reason, light modulators are called external light modulators.		The easiest way to obtain modulation is modulation of intensity of a light by the current driving the light source ([[laser diode]]). This sort of modulation is called direct modulation, as opposed to the external modulation performed by a light modulator. For this reason, light modulators are called external light modulators.
			According to manipulation of the properties of material modulators are divided into two groups, absorptive modulators ([[absorption coefficient]]) and refractive modulators ([[refractive index]] of the material). [[Absorption coefficient]] can be manipulated by Franz-Keldysh effect, Quantum-Confined [[Stark Effect]], excitonic absorption, or changes of free carrier concentration. Usually, if several such effects appear together, the modulator is called electro-absorptive modulator. Refractive modulators most often make use of [[electro-optic effect]] (amplitude & phase modulation), other modulators are made with [[acousto-optic effect]], [[magneto-optic effect]] such as Faraday and Cotton-Mouton effects. The other case of modulators is [[spatial light modulator]] (SLM) which is modified two dimensional distribution of amplitude & phase of an optical wave.

	~~According to manipulation of the properties of material modulators are divided into two groups, absorptive modulators (~~[[~~absorption coefficient]]) and refractive~~ modulators ~~([[refractive index]] of the material). [[Absorption coefficient~~]] can be ~~manipulated by Franz~~-~~Keldysh effect~~, ~~Quantum-Confined~~ [[~~Stark Effect~~]], ~~excitonic absorption~~, ~~or changes of free carrier concentration~~. ~~Usually~~, ~~if several such effects appear together~~, ~~the modulator is called electro-absorptive modulator~~. ~~Refractive modulators most often make use~~ of ~~[[electro~~-~~optic effect]]~~ (~~amplitude & phase modulation~~), ~~other modulators are made with [[acousto~~-~~optic effect]]~~, ~~[[magneto~~-~~optic effect]] such as Faraday and Cotton~~-~~Mouton effects~~. The ~~other case~~ of ~~modulators is~~ [[~~spatial light~~ modulator]] (~~SLM~~) ~~which is modified two dimensional distribution of amplitude & phase of an~~ optical ~~wave~~.		[[Optical modulators]] can be implemented using Semiconductor Nano-structures to increase the performance like high operation, high stability, high speed response, and highly compact system. Highly compact [[electro-optical modulators]] have been demonstrated in compound semiconductors.<ref>Sadagopan, T., Choi, S. J., Dapkus, P. D. & Bond, A. E. Digest of the LEOS Summer Topical Meetings MC2–-3 (IEEE, Piscataway, New Jersey (2004)</ref> However, in silicon, electro-optical modulation has been demonstrated only in large structures, and is therefore inappropriate for effective on-chip
			integration. Electro-optical control of light on silicon is challenging owing to its weak electro-optical properties. The large dimensions of previously demonstrated structures were necessary to achieve a signiﬁcant modulation of the transmission in spite of the small change of refractive index of silicon. Liu et al. have recently demonstrated a high-speed silicon [[optical modulator]] based on a metal–oxide–semiconductor (MOS) conﬁguration<ref>Liu, A. et al. Nature 427, 615–618 (2004)</ref>. Their work showed a high-speed optical active device on silicon—acritical milestone towards [[optoelectronic]] integration on silicon.


	=== Electro-optic modulator ===		=== Electro-optic modulator of nano-structures ===

	An electro-optic modulator is a device which can be used for controlling the power, phase or polarization of a laser beam with an electrical control signal. It typically contains one or two [[Pockels cell]]s, and possibly additional optical elements such as polarizers. The principle of operation is based on the linear [[electro-optic effect]] (the [[Pockels effect]], the modification of the [[refractive index]] of a nonlinear crystal by an electric field in proportion to the field strength).		An electro-optic modulator is a device which can be used for controlling the power, phase or polarization of a laser beam with an electrical control signal. It typically contains one or two [[Pockels cell]]s, and possibly additional optical elements such as polarizers. The principle of operation is based on the linear [[electro-optic effect]] (the [[Pockels effect]], the modification of the [[refractive index]] of a nonlinear crystal by an electric field in proportion to the field strength).

	The crystal which is covered by electrode may be considered to be a voltage-variable wave-plate. When a voltage is applied, the retardation of laser polarization of the light would be changed while a beam passes through an ADP crystal. This variation in polarization results in intensity modulation downstream from the output polarizer. The output polarizer converts the phase shift into an [[amplitude modulation]]. ~~The ideal electro-optic material possesses all of the following properties:~~		The crystal which is covered by electrode may be considered to be a voltage-variable wave-plate. When a voltage is applied, the retardation of laser polarization of the light would be changed while a beam passes through an ADP crystal. This variation in polarization results in intensity modulation downstream from the output polarizer. The output polarizer converts the phase shift into an [[amplitude modulation]].

	~~• large change in~~ [[~~refractive index~~]] ~~per volt~~		[[File:optical_mod1.jpg]]

	~~• high optical quality and transmission~~

	~~• low [[dielectric constant]]~~ (~~low capacitance~~)		Micrometre-scale silicon electro-optic modulator<ref>Nature 435, 325-327 (19 May 2005)</ref>

	~~• low dielectric loss tangent (no dielectric heating due~~ to a ~~high-frequency electric field)~~		This device was fabricated a shape of the p-i-n ring resonator on a [[silicon-on-insulator]] substrate with a 3-mm-thick buried oxide layer. Both the waveguide coupling to the ring and that forming the ring have awidth of 450 nm and a height of 250 nm. The diameter of the ring is 12 mm, and the spacing between the ring and the straight waveguide is 200 nm.


	~~• no distortions in modulators output from piezoelectric resonances~~		=== Acousto-optic modulator of nano-structures ===

	~~[[File:optical_mod1.jpg]]~~


	=== Acousto-optic modulator ===

	Acousto-optic modulators are used to vary and control laser beam intensity. A Bragg configuration gives a single first order output beam, whose intensity is directly linked to the power of RF control signal. The rise time of the modulator is simply deduced by the necessary time for the acoustic wave to travel through the laser beam. For highest speeds the laser beam will be focused down, forming a beam waist as it passes through the modulator.		Acousto-optic modulators are used to vary and control laser beam intensity. A Bragg configuration gives a single first order output beam, whose intensity is directly linked to the power of RF control signal. The rise time of the modulator is simply deduced by the necessary time for the acoustic wave to travel through the laser beam. For highest speeds the laser beam will be focused down, forming a beam waist as it passes through the modulator.
Line 33:		Line 31:
	[[File:optical_mod3.jpg]]		[[File:optical_mod3.jpg]]


	~~=== Megneto-optic modulator ===~~

	A dc magnetic field Hdc is applied perpendicular to the light propagation direction to produce a single domain, transverse directed 4~Ms. The rf modulation field Hrf, applied by means of a coil along the light propagation direction, wobbles 4~Ms through an angle of @ and produces a time varying magnetization component in the longitudinal direction. This component then produces an ac variation in the plane of polarization via the longitudinal Faraday effect. Conversion to [[amplitude modulation]] is accomplished by the indicated analyzer.

	~~[[File:optical_mod2.jpg]]~~





	~~== Optical modulators using semiconductor nano-structures ==~~


	[[Optical modulators]] can be implemented using Semiconductor Nano-structures to increase the performance like high operation, high stability, high speed response, and highly compact system. Highly compact electro-optical modulators have been demonstrated in compound semiconductors.<ref>Sadagopan, T., Choi, S. J., Dapkus, P. D. & Bond, A. E. Digest of the LEOS Summer Topical Meetings MC2–-3 (IEEE, Piscataway, New Jersey (2004)</ref> However, in silicon, electro-optical modulation has been demonstrated only in large structures, and is therefore inappropriate for effective on-chip
	integration. Electro-optical control of light on silicon is challenging owing to its weak electro-optical properties. The large dimensions of previously demonstrated structures were necessary to achieve a signiﬁcant modulation of the transmission in spite of the small change of refractive index of silicon. Liu et al. have recently demonstrated a high-speed silicon optical modulator based on a metal–oxide–semiconductor (MOS) conﬁguration<ref>Liu, A. et al. Nature 427, 615–618 (2004)</ref>. Their work showed a high-speed optical active device on silicon—acritical milestone towards [[optoelectronic]] integration on silicon.


	~~=== Electro-optic modulator of nano-structures ===~~

	~~Micrometre-scale silicon electro-optic modulator<ref>Nature 435, 325-327 (19 May 2005)</ref>~~


	This device was fabricated a shape of the p-i-n ring resonator on a [[silicon-on-insulator]] substrate with a 3-mm-thick buried oxide layer. Both the waveguide coupling to the ring and that forming the ring have awidth of 450 nm and a height of 250 nm. The diameter of the ring is 12 mm, and the spacing between the ring and the straight waveguide is 200 nm.


	~~=== Acousto-optic modulator of nano-structures ===~~

	Acoustic [[solitons]] in semiconductor nanostructures<ref>Journal of Physics: Conference Series 92 (PHONONS 2007)</ref>		Acoustic [[solitons]] in semiconductor nanostructures<ref>Journal of Physics: Conference Series 92 (PHONONS 2007)</ref>


	Acoustic [[solitons]] strongly influence the electron states in a semiconductor nanostructure. The amplitude of [[soliton]] pulses is so high that the electron states in a [[quantum well]] make temporal excursions in energy up to 10 meV. The subpicosecond duration of the [[solitons]] is less than the coherence time of the optical transition between the electron states and a frequency modulation of emitted light during the coherence time (chirping effect) is observed. This system is for an ultrafast control of electron states in semiconductor nanostructures.		Acoustic [[solitons]] strongly influence the electron states in a semiconductor nanostructure. The amplitude of [[soliton]] pulses is so high that the electron states in a [[quantum well]] make temporal excursions in energy up to 10 meV. The subpicosecond duration of the [[solitons]] is less than the coherence time of the optical transition between the electron states and a frequency modulation of emitted light during the coherence time (chirping effect) is observed. This system is for an ultrafast control of electron states in semiconductor nanostructures.
Line 68:		Line 38:

	=== Magneto-optic modulator of nano-structures ===		=== Magneto-optic modulator of nano-structures ===

			A dc magnetic field Hdc is applied perpendicular to the light propagation direction to produce a single domain, transverse directed 4~Ms. The rf modulation field Hrf, applied by means of a coil along the light propagation direction, wobbles 4~Ms through an angle of @ and produces a time varying magnetization component in the longitudinal direction. This component then produces an ac variation in the plane of polarization via the longitudinal Faraday effect. Conversion to [[amplitude modulation]] is accomplished by the indicated analyzer.

			[[File:optical_mod2.jpg]]


	Wideband magneto-optic modulation in a bismuth-substituted yttrium iron garnet waveguide<ref>Optics Communications Volume 220, Issues 4-6</ref>		Wideband magneto-optic modulation in a bismuth-substituted yttrium iron garnet waveguide<ref>Optics Communications Volume 220, Issues 4-6</ref>

wikademia>Jmk8755 at 13:37, 8 June 2009

2009-06-08T13:37:09Z

← Older revision		Revision as of 13:37, 8 June 2009
Line 47:		Line 47:


	Optical modulators can be implemented using Semiconductor Nano-structures to increase the performance like high operation, high stability, high speed response, and highly compact system. Highly compact electro-optical modulators have been demonstrated in compound semiconductors.<ref>Sadagopan, T., Choi, S. J., Dapkus, P. D. & Bond, A. E. Digest of the LEOS Summer Topical Meetings MC2–-3 (IEEE, Piscataway, New Jersey (2004)</ref> However, in silicon, electro-optical modulation has been demonstrated only in large structures, and is therefore inappropriate for effective on-chip		[[Optical modulators]] can be implemented using Semiconductor Nano-structures to increase the performance like high operation, high stability, high speed response, and highly compact system. Highly compact electro-optical modulators have been demonstrated in compound semiconductors.<ref>Sadagopan, T., Choi, S. J., Dapkus, P. D. & Bond, A. E. Digest of the LEOS Summer Topical Meetings MC2–-3 (IEEE, Piscataway, New Jersey (2004)</ref> However, in silicon, electro-optical modulation has been demonstrated only in large structures, and is therefore inappropriate for effective on-chip
	integration. Electro-optical control of light on silicon is challenging owing to its weak electro-optical properties. The large dimensions of previously demonstrated structures were necessary to achieve a signiﬁcant modulation of the transmission in spite of the small change of refractive index of silicon. Liu et al. have recently demonstrated a high-speed silicon optical modulator based on a metal–oxide–semiconductor (MOS) conﬁguration<ref>Liu, A. et al. Nature 427, 615–618 (2004)</ref>. Their work showed a high-speed optical active device on silicon—acritical milestone towards [[optoelectronic]] integration on silicon.		integration. Electro-optical control of light on silicon is challenging owing to its weak electro-optical properties. The large dimensions of previously demonstrated structures were necessary to achieve a signiﬁcant modulation of the transmission in spite of the small change of refractive index of silicon. Liu et al. have recently demonstrated a high-speed silicon optical modulator based on a metal–oxide–semiconductor (MOS) conﬁguration<ref>Liu, A. et al. Nature 427, 615–618 (2004)</ref>. Their work showed a high-speed optical active device on silicon—acritical milestone towards [[optoelectronic]] integration on silicon.

wikademia>Jmk8755 at 13:36, 8 June 2009

2009-06-08T13:36:36Z

← Older revision		Revision as of 13:36, 8 June 2009
Line 1:		Line 1:
	~~<!-- Please do not remove or change this AfD message until the issue is settled -->~~		An [[optical modulator]] is a optical device which is used to modulate a beam of light with perturbation device. it is a kind of transmitter to convert information to optical binary signal through [[optical fiber]] ([[optical waveguide]]) or transmission medium of optical frequency in fiber optic communication. There are several method to manipulate this device depending on the parameter of a light beam like [[amplitude modulator]] (majority), [[phase modulator]], polarization modulator etc.
	~~{{AfDM\|page=Optical modulators using semiconductor nano-structures\|logdate=2009 June 7\|substed=yes }}~~
	~~<!-- For administrator use only: {{oldafdfull\|page=Optical modulators using semiconductor nano-structures\|date=7 June 2009\|result='''keep'''}} -->~~
	~~<!-- End of AfD message, feel free to edit beyond this point -->~~
	An ~~'''~~optical modulator~~'''~~ is a optical device which is used to modulate a beam of light with perturbation device. it is a kind of transmitter to convert information to optical binary signal through [[optical fiber]] ([[optical waveguide]]) or transmission medium of optical frequency in fiber optic communication. There are several method to manipulate this device depending on the parameter of a light beam like [[amplitude modulator]] (majority), [[phase modulator]], polarization modulator etc.

	The easiest way to obtain modulation is modulation of intensity of a light by the current driving the light source ([[laser diode]]). This sort of modulation is called direct modulation, as opposed to the external modulation performed by a light modulator. For this reason, light modulators are called external light modulators.		The easiest way to obtain modulation is modulation of intensity of a light by the current driving the light source ([[laser diode]]). This sort of modulation is called direct modulation, as opposed to the external modulation performed by a light modulator. For this reason, light modulators are called external light modulators.

wikademia>Headbomb: AfD

2009-06-07T11:17:29Z

AfD

← Older revision		Revision as of 11:17, 7 June 2009
Line 1:		Line 1:
	{{~~dated prod~~\|~~concern~~ = ~~fork of existing artilces~~\|~~month~~ = June\|~~day~~ = 4\|~~year~~ = ~~2009~~\|~~time~~ = ~~20:01~~\|~~timestamp~~ = ~~20090604200111~~}}		<!-- Please do not remove or change this AfD message until the issue is settled -->
	<!-- ~~Do not use the "dated prod" template directly; the above line is generated by "subst:prod\|reason"~~ -->		{{AfDM\|page=Optical modulators using semiconductor nano-structures\|logdate=2009 June 7\|substed=yes }}
			<!-- For administrator use only: {{oldafdfull\|page=Optical modulators using semiconductor nano-structures\|date=7 June 2009\|result='''keep'''}} -->
			<!-- End of AfD message, feel free to edit beyond this point -->
	An '''optical modulator''' is a optical device which is used to modulate a beam of light with perturbation device. it is a kind of transmitter to convert information to optical binary signal through [[optical fiber]] ([[optical waveguide]]) or transmission medium of optical frequency in fiber optic communication. There are several method to manipulate this device depending on the parameter of a light beam like [[amplitude modulator]] (majority), [[phase modulator]], polarization modulator etc.		An '''optical modulator''' is a optical device which is used to modulate a beam of light with perturbation device. it is a kind of transmitter to convert information to optical binary signal through [[optical fiber]] ([[optical waveguide]]) or transmission medium of optical frequency in fiber optic communication. There are several method to manipulate this device depending on the parameter of a light beam like [[amplitude modulator]] (majority), [[phase modulator]], polarization modulator etc.