Rope pump: Difference between revisions
→Rigid valve rope pump: bare url > cite web |
m Idea moved page Archive:Rope pump to Rope pump |
||
| (34 intermediate revisions by 27 users not shown) | |||
| Line 1: | Line 1: | ||
[[Image: | [[Image:Rope_pump_in_Museo_Nazionale_Scienza_e_Tecnologia_Leonardo_da_Vinci.jpg|thumb|Rope pump in [[Museo Nazionale Scienza e Tecnologia Leonardo da Vinci|Milan Science Museum]]]] | ||
A '''rope pump''' is a | A '''rope pump''' is a type of [[pump]] that uses a loose-hanging rope, which is lowered into a [[Water well|well]] and drawn up through a long pipe, with its bottom end submerged in water. Round disks or knots, matching the diameter of the pipe, are attached to the rope, allowing water to be pulled to the surface. The rope pump is commonly used in [[developing countries]] for both community water supply and [[Self-supply of water and sanitation|self-supply]]. It can be installed on [[boreholes]] or hand-dug wells, providing an affordable and efficient water-lifting solution. | ||
==Description== | ==Description== | ||
[[File:Rope Pump.svg|thumb|Rope pump schematic]] | [[File:Rope Pump.svg|thumb|Rope pump schematic]] | ||
A rope pump is a type of [[pump]] of which the main or most visible component is a continuous piece of rope, in which the rope is integral in raising water from a [[Water well|well]]. Rope pumps are often used in [[Developing country|developing areas]], the most common design of which uses [[Polyvinyl chloride|PVC]] [[Plastic pressure pipe systems|pipe]] and a rope with flexible or rigid valves. Rope pumps are cheap to build and easy to maintain. One design of rope pump using a solar-powered rope pump can pump 3,000 litres to 15 meters per day using an 80 watt [[solar panel]] .<ref name=SolarAid/> Rope pumps can be powered by low speed gasoline/diesel engines, electricity,<ref>{{cite web|url=http://www.daenvis.org/ropepump9.htm|title=Moto Rope pumps|accessdate=2009-04-10}}</ref> human energy,<ref name=thefarm>{{cite web|url=http://www.thefarm.org/charities/i4at/lib2/ropepump.htm|title=Bicycle Rope Pump|accessdate=2009-04-10}}</ref> wind<ref>{{cite web|url=http://www.gamos.demon.co.uk/just%20gamos%20homepage/henkfnl2.htm|title= | A rope pump is a type of [[pump]] of which the main or most visible component is a continuous piece of rope, in which the rope is integral in raising water from a [[Water well|well]]. Rope pumps are often used in [[Developing country|developing areas]], the most common design of which uses [[Polyvinyl chloride|PVC]] [[Plastic pressure pipe systems|pipe]] and a rope with flexible or rigid valves. Rope pumps are cheap to build and easy to maintain. One design of rope pump using a solar-powered rope pump can pump 3,000 litres to 15 meters per day using an 80 watt [[solar panel]].<ref name=SolarAid/> Rope pumps can be powered by low speed gasoline/diesel engines, electricity,<ref>{{cite web|url=http://www.daenvis.org/ropepump9.htm|title=Moto Rope pumps|accessdate=2009-04-10}}</ref> human energy,<ref name=thefarm>{{cite web|url=http://www.thefarm.org/charities/i4at/lib2/ropepump.htm|title=Bicycle Rope Pump|accessdate=2009-04-10|url-status=dead|archiveurl=https://web.archive.org/web/20080917151140/http://www.thefarm.org/charities/i4at/lib2/ropepump.htm|archivedate=2008-09-17}}</ref> wind<ref>{{cite web|url=http://www.gamos.demon.co.uk/just%20gamos%20homepage/henkfnl2.htm|title=The Rope Wind Pump|accessdate=2009-04-10|url-status=dead|archiveurl=https://web.archive.org/web/20090521195033/http://www.gamos.demon.co.uk/just%20gamos%20homepage/henkfnl2.htm|archivedate=2009-05-21}}</ref> and solar energy.<ref name=SolarAid>{{cite web|url=http://www.solar-aid.org/project_water_pump/|title=Solar powered water pump|publisher=Solar Aid|accessdate=2009-04-10 |archiveurl=https://web.archive.org/web/20080401135207/http://www.solar-aid.org/project_water_pump/ |archivedate=2008-04-01}}</ref> | ||
==History== | ==History== | ||
Washer or [[chain pump]]s were used by the [[China|Chinese]] over 1000 years ago.<ref name=Ropepumphistory>{{cite web |url=http://www.ropepump.com/his/his.htm |title=history |publisher=Ropepump.com |accessdate=2009-04-10}} Rope pump history including 16th century image of the Chinese chain pump</ref> In the 1980s Reinder van Tijen an inventor and grass roots activist, with the support of the ''Royal Tropical Institute'' of [[Amsterdam]], created and began instructing various communities around the world how to make a rope pump from simple available parts using PVC pipes and plastic moldings. He began at [[Burkina Faso]] in Africa, continued to [[Tunisia]], [[Thailand]] and [[Gambia]] among others.<ref>[http://crossroadsmag.eu/2008/06/demotech/ The man outside the box] On Van Tijen at Crossroads magazine website. The site includes some clear images of the invention and how it works.</ref> In [[Nicaragua]], the technology was introduced around 1985 and by 2010 there were an estimated 70,000 pumps installed. An estimated 20,000 were installed on wells for rural communal water supply and over 25% of the rural water supply was with rope pumps. The other 50,000 pumps were installed on private wells of rural families and farmers, partly or completely paid for by families themselves, (so called Self-supply). Many rope pumps are now being replaced by electric pumps so families climb "the water ladder". It is also used in other parts of Central America with over 25,000 pumps installed to date.<ref name=Ropepumphistory/> In Africa the improved model of the rope pump was introduced around 1995 but in many countries failed due to the use of outdated designs and lack of long term follow up on quality in production and installation.<ref>Article "130.000 rope pumps worldwide", by Haanen, R.</ref> By the 2020 an estimated 5 million people in 20 countries worldwide were using rope pumps for domestic uses and small scale irrigation. | |||
By the | |||
== Construction == | == Construction == | ||
| Line 17: | Line 16: | ||
=== Rigid valve rope pump === | === Rigid valve rope pump === | ||
Rigid valves using plastic or metal [[Washer (mechanical)|washers]] that fit tightly into the PVC pipe as the rope is dragged through are also used. If the fit is tight, the washers can be spaced up to half a meter apart. The deeper the well, the smaller the pipe inner diameter must be, given the available power constraints. These rope pumps are often worked with a hand crank<ref>{{cite web |archiveurl= | Rigid valves using plastic or metal [[Washer (mechanical)|washers]] that fit tightly into the PVC pipe as the rope is dragged through are also used. If the fit is tight, the washers can be spaced up to half a meter apart. The deeper the well, the smaller the pipe inner diameter must be, given the available power constraints. These rope pumps are often worked with a hand crank<ref>{{cite web |archiveurl=https://web.archive.org/web/20091026235138/http://www.geocities.com/ResearchTriangle/System/7014/rope.html |archivedate=26 October 2009 |url=http://www.geocities.com/ResearchTriangle/System/7014/rope.html |title=Rope Water Pump |publisher=Working Group on Development Technology}}</ref> | ||
Valves can also be made from knots in the rope itself.<ref>[[Appropedia:Rope pump knots]]</ref> | Valves can also be made from knots in the rope itself.<ref>[[Appropedia:Rope pump knots]]</ref> | ||
| Line 24: | Line 23: | ||
Valveless pumps rely on friction with water clinging to the rope, which is moved at high speed, often using a bicycle to produce the required speed. It is a less efficient design but is simpler to construct than the other rope pumps.<ref name="thefarm"/> | Valveless pumps rely on friction with water clinging to the rope, which is moved at high speed, often using a bicycle to produce the required speed. It is a less efficient design but is simpler to construct than the other rope pumps.<ref name="thefarm"/> | ||
== Intellectual | == Intellectual property == | ||
Rope pump technology is in the public domain and there are no patents pending on it.<ref name=Ropepumphistory/> | Rope pump technology is in the public domain and there are no patents pending on it.<ref name=Ropepumphistory/> | ||
==See also== | ==See also== | ||
* [[Wind pump]] | * [[Wind pump]] | ||
| Line 38: | Line 36: | ||
* [http://www.ropepumps.org rope pump site] | * [http://www.ropepumps.org rope pump site] | ||
* [[appropedia:Rope pump|Rope pump]] | * [[appropedia:Rope pump|Rope pump]] | ||
* [http:// | * [http://akvopedia.org/wiki/Rope_pump Akvopedia Rope Pump article] | ||
* {{cite book | |||
|first=Robert |last=Lambdon | |||
|title=How to Make a Rope and Washer Pump | |||
|publisher=Practical Application Publishing | |||
|year=1989 | |||
|isbn=978-1-85339-022-7}} | |||
{{DEFAULTSORT:Rope Pump}} | {{DEFAULTSORT:Rope Pump}} | ||
[[Category:Pumps]] | [[Category:Pumps]] | ||
Latest revision as of 04:17, 29 September 2026
A rope pump is a type of pump that uses a loose-hanging rope, which is lowered into a well and drawn up through a long pipe, with its bottom end submerged in water. Round disks or knots, matching the diameter of the pipe, are attached to the rope, allowing water to be pulled to the surface. The rope pump is commonly used in developing countries for both community water supply and self-supply. It can be installed on boreholes or hand-dug wells, providing an affordable and efficient water-lifting solution.
Description
A rope pump is a type of pump of which the main or most visible component is a continuous piece of rope, in which the rope is integral in raising water from a well. Rope pumps are often used in developing areas, the most common design of which uses PVC pipe and a rope with flexible or rigid valves. Rope pumps are cheap to build and easy to maintain. One design of rope pump using a solar-powered rope pump can pump 3,000 litres to 15 meters per day using an 80 watt solar panel.[1] Rope pumps can be powered by low speed gasoline/diesel engines, electricity,[2] human energy,[3] wind[4] and solar energy.[1]
History
Washer or chain pumps were used by the Chinese over 1000 years ago.[5] In the 1980s Reinder van Tijen an inventor and grass roots activist, with the support of the Royal Tropical Institute of Amsterdam, created and began instructing various communities around the world how to make a rope pump from simple available parts using PVC pipes and plastic moldings. He began at Burkina Faso in Africa, continued to Tunisia, Thailand and Gambia among others.[6] In Nicaragua, the technology was introduced around 1985 and by 2010 there were an estimated 70,000 pumps installed. An estimated 20,000 were installed on wells for rural communal water supply and over 25% of the rural water supply was with rope pumps. The other 50,000 pumps were installed on private wells of rural families and farmers, partly or completely paid for by families themselves, (so called Self-supply). Many rope pumps are now being replaced by electric pumps so families climb "the water ladder". It is also used in other parts of Central America with over 25,000 pumps installed to date.[5] In Africa the improved model of the rope pump was introduced around 1995 but in many countries failed due to the use of outdated designs and lack of long term follow up on quality in production and installation.[7] By the 2020 an estimated 5 million people in 20 countries worldwide were using rope pumps for domestic uses and small scale irrigation.
Construction
The original rope pumps used knots along the rope length but can be made with flexible or rigid valves on the rope instead of knots. Alternatively they may use only rope, simply relying on the water clinging to the rope as it is quickly pulled to the surface.
Flexible valve rope pumps
Flexible valves can be made from cut pieces of bicycle wheel tubing. The valves are positioned approximately 20 cm apart on the rope. One disadvantage of flexible valve rope pumps is that they must be appropriately sized and thickness for different types, sizes and length of pipes.[8]
Rigid valve rope pump
Rigid valves using plastic or metal washers that fit tightly into the PVC pipe as the rope is dragged through are also used. If the fit is tight, the washers can be spaced up to half a meter apart. The deeper the well, the smaller the pipe inner diameter must be, given the available power constraints. These rope pumps are often worked with a hand crank[9]
Valves can also be made from knots in the rope itself.[10]
Valveless rope pumps
Valveless pumps rely on friction with water clinging to the rope, which is moved at high speed, often using a bicycle to produce the required speed. It is a less efficient design but is simpler to construct than the other rope pumps.[3]
Intellectual property
Rope pump technology is in the public domain and there are no patents pending on it.[5]
See also
References
- ↑ 1.0 1.1 "Solar powered water pump". Solar Aid. Archived from the original on 2008-04-01. https://web.archive.org/web/20080401135207/http://www.solar-aid.org/project_water_pump/. Retrieved on 2009-04-10.
- ↑ "Moto Rope pumps". http://www.daenvis.org/ropepump9.htm. Retrieved on 2009-04-10.
- ↑ 3.0 3.1 "Bicycle Rope Pump". Archived from the original on 2008-09-17. https://web.archive.org/web/20080917151140/http://www.thefarm.org/charities/i4at/lib2/ropepump.htm. Retrieved on 2009-04-10.
- ↑ "The Rope Wind Pump". Archived from the original on 2009-05-21. https://web.archive.org/web/20090521195033/http://www.gamos.demon.co.uk/just%20gamos%20homepage/henkfnl2.htm. Retrieved on 2009-04-10.
- ↑ 5.0 5.1 5.2 "history". Ropepump.com. http://www.ropepump.com/his/his.htm. Retrieved on 2009-04-10. Rope pump history including 16th century image of the Chinese chain pump
- ↑ The man outside the box On Van Tijen at Crossroads magazine website. The site includes some clear images of the invention and how it works.
- ↑ Article "130.000 rope pumps worldwide", by Haanen, R.
- ↑ Bartle, Phil. "Consider the rope pump". Community Empowerment Collective. http://cec.vcn.bc.ca/cmp/modules/wat-ro.htm. Retrieved on 13 March 2015.
- ↑ "Rope Water Pump". Working Group on Development Technology. Archived from the original on 26 October 2009. https://web.archive.org/web/20091026235138/http://www.geocities.com/ResearchTriangle/System/7014/rope.html.
- ↑ Appropedia:Rope pump knots
External links
- rope pump site
- Rope pump
- Akvopedia Rope Pump article
- Lambdon, Robert (1989). How to Make a Rope and Washer Pump. Practical Application Publishing. ISBN 978-1-85339-022-7.