Beams: Difference between revisions

wikademia>Gustable
m Renamed page from "Distributed Forces"
 
wikademia>Wikademia
m Text replace - 'w:' to 'Wikipedia:'
 
(16 intermediate revisions by 5 users not shown)
Line 1: Line 1:
'''Part of the [[Topic:Statics|Statics]] course offered by the ''[[Topic:Applied Mechanics|Division of Applied Mechanics]]'', ''[[School:Engineering|School of Engineering]]'' and the ''[[Portal:Engineering and Technology|Engineering and Technology Portal]]'''''
{{ntnes}}
 
==Lecture==
==Lecture==
Distributed forces are very common in the design and analysis of structures themselves, while point forces are often what structures are designed to withstand.  The weight of a stationary car on a bridge should be interpreted as four point forces at the point of contact of each tire with the bridge, while the weight of a long train could be interpreted as a distributed force along the length of the train.
Distributed forces are very common in the design and analysis of structures themselves, while point forces are often what structures are designed to withstand.  The weight of a stationary car on a bridge should be interpreted as four point forces at the point of contact of each tire with the bridge, while the weight of a long train could be interpreted as a distributed force along the length of the train.
Line 17: Line 16:


===Centroids===
===Centroids===
If a body has a uniform density, then as we may see in equation (2) above, the density cancels out, and we are left with a resulting '''COM''' that is determined as a geometric analysis and is called a '''centroid'''. The '''centroid''' of a volume may be calculated by:
If a body has a uniform density, then as we may see in equation (2) above, the density cancels out, and we are left with a resulting '''COM''' that is determined as a geometric analysis and is called a '''centroid'''. The '''centroid''' of a volume may be calculated by the following equations.  (Also see the [[Wikipedia:List_of_centroids|List of Centroids]] on Wikipedia.)
<BR>
<BR>
  <math>\bar x = \frac{\int x dV}{V}</math>,  <math>\bar y = \frac{\int y dV}{V}</math>,  <math>\bar z = \frac{\int z dV}{V}</math>        (4)
  <math>\bar x = \frac{\int x dV}{V}</math>,  <math>\bar y = \frac{\int y dV}{V}</math>,  <math>\bar z = \frac{\int z dV}{V}</math>        (4)


===Distributed Forces===
===Distributed Forces===
[[Image:Beam_in_Bending.png|thumb|250px|left|A Beam Bending Under a Distributed Force]]
[[Image:Bending.png|thumb|250px|left|A Beam Bending Under a Distributed Force]]
A distributed force is a force applied over a length, area or volume.  A line-distributed force such as the weight of a bridge suspended off of a single tension wire, is measured in units of force per unit of length (Newtons/meter).  An area-distributed force such as the weight of a ship's hull against the body of water it floats in, is measured in units of force per unit of area (Newtons/m<sup>2</sup>) and is referred to as ''pressure'' when associated with the force of water and ''stress'' when associated with the internal forces affecting solids (such as those invoked by tension or compression).  A volume-distributed force such as the force of gravity affecting a mass within the gravity field of a celestial body, is measured in units of force per unit of volume (Newtons/m<sup>3</sup>) and is often called a ''body force''.  A distributed force, like any force, may be simplified into a resultant point force <math>\ R</math>, which acts at the ''centroid'' of the function described by the resultant force <math>\ w</math>.
A distributed force is a force applied over a length, area or volume.  A line-distributed force such as the weight of a bridge suspended off of a single tension wire, is measured in units of force per unit of length (Newtons/meter).  An area-distributed force such as the weight of a ship's hull against the body of water it floats in, is measured in units of force per unit of area (Newtons/m<sup>2</sup>) and is referred to as ''pressure'' when associated with the force of water and ''stress'' when associated with the internal forces affecting solids (such as those invoked by tension or compression).  A volume-distributed force such as the force of gravity affecting a mass within the gravity field of a celestial body, is measured in units of force per unit of volume (Newtons/m<sup>3</sup>) and is often called a ''body force''.  A distributed force, like any force, may be simplified into a resultant point force <math>\ R</math>, which acts at the ''centroid'' of the function described by the resultant force <math>\ w</math>.
  <math>\bar x = \frac{\int x w dx}{R}</math>
  <math>\bar x = \frac{\int x w dx}{R}</math>


===Beams and Deflection===
===Static Determinism===
[[Image:xxx|thumb|300px|left|A Triangle Space Truss]]
For beam loading calculations wherein the external forces may be calculated by using only the principle of equilibrium, such a beam or system of forces is called ''statically determinate''.  Any system whose resultant forces may not be calculated only through external forces and the principle of equilibrium, is called a ''statically indeterminate'' system, and must be solved through the additional analysis of internal forces and the deformations induced by them.  Such systems often have more supports than are needed at minimum and may be tentatively identified as such (i.e. a beam with three supports instead of two). 
For beam loading calculations wherein the external forces may be calculated by using only the principle of equilibrium, such a beam or system of forces is called ''statically determinate''.  Any system that   
<BR>
===Internal Forces===
[[Image:IndeterminateBeam.png|thumb|400px|left|A bending beam under distributed and point forces and its associated moment and shear diagrams.]]
Internal forces within beams come in three flavors.  Moments (bending), Shears (cutting) and Torsion (twisting).  Oddly, each of these forces may be derived in a related manner. 
 
Vertical forces, and thus shear forces, may of course be evaluated by using the ''principle of equilibrium'' on a rigid body.  All vertically aligned forces in the ''y-axis'' must sum to equal zero.  The shear force may also be considered the ''integral'' of the loads in the vertical direction, or <math>\ w = -\frac{dV}{dx}</math>.
 
Similarly, moments may be evaluated by using the ''principle of equilibrium'' on a rigid body as well.  However, bending moment may be evaluated as the ''integral'' of the shear force, that is to say <math>\ V = \frac{dM}{dx}</math>.  Thereby, moment is also the double integral of the load in the vertical direction or, <math>\ -w = \frac{d^2M}{dx^2}</math>.
 
Torsional forces in the opposite axis are to be evaluated in the same manner as bending moments, although care must be made not to confuse forces in other directions with those contributing to torsional stresses.
 
===Bending===
[[Wikipedia:List_of_area_moments_of_inertia|List of area moments of inertia]]
A bending beam is <math>\ w</math>.
<BR>
<BR>
<BR>
<BR>
Line 34: Line 46:
==Assignments==
==Assignments==
'''Activities:'''
'''Activities:'''
* Create an [[activity]]
* Create an [[Beams/activity|activity]]


'''Readings:'''
'''Readings:'''
Line 41: Line 53:


'''Study guide:'''  
'''Study guide:'''  
# Wikipedia article:[[w:Distributed force|Distributed force]]
# Wikipedia article:[[Wikipedia:Distributed force|Distributed force]]
# Wikipedia article:[[w:Center_of_mass|Center of mass]]
# Wikipedia article:[[Wikipedia:Center_of_mass|Center of mass]]
# Wikipedia article:[[w:Centroid|Centroid]]
# Wikipedia article:[[Wikipedia:Centroid|Centroid]]
# Wikipedia article:[[w:List of centroids|List of centroids]]
# Wikipedia article:[[Wikipedia:List of centroids|List of centroids]]
# Wikipedia article:[[w:Pappus's centroid theorem|Pappus's centroid theorem]]
# Wikipedia article:[[Wikipedia:Pappus's centroid theorem|Pappus's centroid theorem]]
# Wikipedia article:[[w:Beam (structure)|Beam (structure)]]
# Wikipedia article:[[Wikipedia:Beam (structure)|Beam (structure)]]
# Wikipedia article:[[w:Beam theory|Beam theory]]
# Wikipedia article:[[Wikipedia:Beam theory|Beam theory]]
# Wikipedia article:[[w:Statically indeterminate|Statically indeterminate]]
# Wikipedia article:[[Wikipedia:Statically indeterminate|Statically indeterminate]]
# Wikipedia article:[[w:Deflection|Deflection]]
# Wikipedia article:[[Wikipedia:Torsion|Torsion]]
# Wikipedia article:[[Wikipedia:Shear_stress|Shear]]
# Wikipedia article:[[Wikipedia:Bending|Bending]]
# Wikipedia article:[[Wikipedia:List_of_area_moments_of_inertia|List of area moments of inertia]]


[[Category:Statics]]
[[Category:Statics]]
[[Category:Advanced Classical Mechanics]]
[[Category:Applied Mechanics]]
[[Category:Mechanical Engineering]]
[[Category:Engineering]]