Beams: Difference between revisions
wikademia>Gustable m added beam pic |
wikademia>Gustable |
||
| Line 31: | Line 31: | ||
===Internal Forces=== | ===Internal Forces=== | ||
[[Image:IndeterminateBeam.png|thumb|400px|left|A bending beam under distributed and point forces and its associated moment and shear diagrams.]] | [[Image:IndeterminateBeam.png|thumb|400px|left|A bending beam under distributed and point forces and its associated moment and shear diagrams.]] | ||
Internal forces within beams come in three flavors. Moments (bending), Shears (cutting) and Torsion (twisting). Oddly, each of these forces may be derived in a related manner. | |||
Vertical forces, and thus shear forces, may of course be evaluated by using the ''principle of equilibrium'' on a rigid body. All vertically aligned forces in the ''y-axis'' must sum to equal zero. The shear force may also be considered the ''integral'' of the loads in the vertical direction, or <math>\ w = -\frac{dV}{dx}</math>. | |||
<math>\ w = -\frac{dV}{dx}</math> | |||
Similarly, moments may be evaluated by using the ''principle of equilibrium'' on a rigid body as well. However, bending moment may be evaluated as the ''integral'' of the shear force, that is to say <math>\ V = \frac{dM}{dx}</math>. Thereby, moment is also the double integral of the load in the vertical direction or, <math>\ -w = \frac{d^2M}{dx^2}</math>. | |||
<math>\ V = \frac{dM}{dx}</math> | |||
Torsional forces in the opposite axis are to be evaluated in the same manner as bending moments, although care must be made not to confuse forces in other directions with those contributing to torsional stresses. | |||
===Bending=== | ===Bending=== | ||