Jump to content

Phosphate buffered saline: Difference between revisions

From IdeaWazaWiki
No edit summary
wikademia>Od Mishehu
Putting back automatic numbering, fixing the problem which caused an anon to remove it
Line 7: Line 7:


To make a 10 liter stock of 10x PBS:
To make a 10 liter stock of 10x PBS:
 
#weigh the following
1. weigh the following
#*800 g NaCl
::*800 g NaCl
#*20 g KCl
::*20 g KCl
#*144 g Na<sub>2</sub>HPO<sub>4</sub>
::*144 g Na<sub>2</sub>HPO<sub>4</sub>
#*24 g KH<sub>2</sub>PO<sub>4</sub>
::*24 g KH<sub>2</sub>PO<sub>4</sub>
#add and dissolve in 8 L of distilled water under mixing
 
#pH is ~6.8, but when you dilute the 10x PBS to 1x PBS it should change to 7.4 (try with a little sample; Phosphate buffers change their pH with the dilution)  
2. add and dissolve in 8 L of distilled water under mixing
#fill up to 10 L with distilled water
 
3. pH is ~6.8, but when you dilute the 10x PBS to 1x PBS it should change to 7.4 (try with a little sample; Phosphate buffers change their pH with the dilution)  
 
4. fill up to 10 L with distilled water


1x PBS final concentration : 137 mM NaCl, 10 mM Phosphate, 2.7 mM KCl, pH 7.4
1x PBS final concentration : 137 mM NaCl, 10 mM Phosphate, 2.7 mM KCl, pH 7.4

Revision as of 15:52, 5 December 2006

Phosphate buffered saline (abbreviated PBS) is a buffer solution commonly used in biochemistry. It is a salty solution containing sodium chloride, sodium phosphate and potassium phosphate. The buffer helps to maintain a constant pH. The concentration usually matches the human body (isotonic).

PBS has many uses because it is isotonic and non-toxic to cells. It can be used to dilute substances. It is used as a cellular cleaning solution.

Additives can be used to add function. For example, PBS with EDTA is also used to disengage attached and clumped cells. Divalent metals such as zinc, however, cannot be added as this will cause precipitation. For these sorts of applications, Good's buffers are recommended.

To make a 10 liter stock of 10x PBS:

  1. weigh the following
    • 800 g NaCl
    • 20 g KCl
    • 144 g Na2HPO4
    • 24 g KH2PO4
  2. add and dissolve in 8 L of distilled water under mixing
  3. pH is ~6.8, but when you dilute the 10x PBS to 1x PBS it should change to 7.4 (try with a little sample; Phosphate buffers change their pH with the dilution)
  4. fill up to 10 L with distilled water

1x PBS final concentration : 137 mM NaCl, 10 mM Phosphate, 2.7 mM KCl, pH 7.4

Template:Biochem-stub