Phosphate buffered saline: Difference between revisions
→Preparation: Correction of concentrations to match Sambrook et al. |
|||
| Line 14: | Line 14: | ||
A 10 liter stock of 10x PBS can be prepared by dissolving 800 g NaCl, 20 g KCl, 144 g Na<sub>2</sub>HPO<sub>4</sub> · 12H<sub>2</sub>O and 24 g KH<sub>2</sub>PO<sub>4</sub> in 8 L of distilled water, and topping up to 10 L. The pH is ~6.8, but when diluted to 1x PBS it should change to 7.4. When making buffer solutions, it is good practice to always measure the pH directly using a [[pH meter]]. If necessary, pH can be adjusted using [[hydrochloric acid]] or [[sodium hydroxide]]. | A 10 liter stock of 10x PBS can be prepared by dissolving 800 g NaCl, 20 g KCl, 144 g Na<sub>2</sub>HPO<sub>4</sub> · 12H<sub>2</sub>O and 24 g KH<sub>2</sub>PO<sub>4</sub> in 8 L of distilled water, and topping up to 10 L. The pH is ~6.8, but when diluted to 1x PBS it should change to 7.4. When making buffer solutions, it is good practice to always measure the pH directly using a [[pH meter]]. If necessary, pH can be adjusted using [[hydrochloric acid]] or [[sodium hydroxide]]. | ||
On dilution, the resultant 1x PBS should have a final concentration of 137 mM NaCl, 10 mM Phosphate, 2 | On dilution, the resultant 1x PBS should have a final concentration of 137 mM NaCl, 2.7 mM KCl, 10 mM Sodium Phosphate dibasic, 2 mM Potassium Phosphate monobasic and a pH of 7.4. | ||