Phosphate buffered saline: Difference between revisions
wikademia>Wikademia mNo edit summary |
wikademia>Eme mNo edit summary |
||
| Line 11: | Line 11: | ||
The simplest way to prepare a PBS solution is to use PBS buffer tablets. They are formulated to give a ready to use PBS solution upon dissolution in a specified quantity of distilled water. They are available in the standard volumes: 100, 200, 500 and 1000 ml <ref>[http://www.medicago.se/_filer/PBS28-eng.pdf Medicago AB, (2003) Phosphate buffered saline pH 7.4 specification sheet]</ref>. | The simplest way to prepare a PBS solution is to use PBS buffer tablets. They are formulated to give a ready to use PBS solution upon dissolution in a specified quantity of distilled water. They are available in the standard volumes: 100, 200, 500 and 1000 ml <ref>[http://www.medicago.se/_filer/PBS28-eng.pdf Medicago AB, (2003) Phosphate buffered saline pH 7.4 specification sheet]</ref>. | ||
A 10 liter stock of 10x PBS can be prepared by dissolving 800 g NaCl, 20 g KCl, 144 g Na<sub>2</sub>HPO<sub>4</sub> and 24 g KH<sub>2</sub>PO<sub>4</sub> in 8 L of distilled water, and topping up to 10 L. The pH is ~6.8, but when diluted to 1x PBS it should change to 7.4. When making buffer solutions, it is good practice to always measure the pH directly using a [[pH meter]]. If necessary, pH can be adjusted using [[hydrochloric acid]] or [[sodium hydroxide]]. | A 10 liter stock of 10x PBS can be prepared by dissolving 800 g NaCl, 20 g KCl, 144 g Na<sub>2</sub>HPO<sub>4</sub> and 24 g KH<sub>2</sub>PO<sub>4</sub> in 8 L of distilled water, and topping up to 10 L. The pH is ~6.8, but when diluted to 1x PBS it should change to 7.4. When making buffer solutions, it is good practice to always measure the pH directly using a [[pH meter]]. If necessary, pH can be adjusted using [[hydrochloric acid]] or [[sodium hydroxide]]. | ||
On dilution, the resultant 1x PBS should have a final concentration of 137 mM NaCl, 2.7 mM KCl, 10 mM Sodium Phosphate dibasic, 2 mM Potassium Phosphate monobasic and a pH of 7.4. | On dilution, the resultant 1x PBS should have a final concentration of 137 mM NaCl, 2.7 mM KCl, 10 mM Sodium Phosphate dibasic, 2 mM Potassium Phosphate monobasic and a pH of 7.4. | ||
Another preparation is described in Molecular Cloning by Sambrook, Fritsch and Maniatis, Apendix B.12<ref>Sambrook, Fritsch, and Maniatis (1989) Molecular Cloning: A Laboratory Manual, 2nd ed., Cold Spring Harbor Laboratory Press, Cold Spring Harbor, New York, volume 3, appendix B.12</ref> as follows: | Another preparation is described in Molecular Cloning by Sambrook, Fritsch and Maniatis, Apendix B.12<ref>Sambrook, Fritsch, and Maniatis (1989) Molecular Cloning: A Laboratory Manual, 2nd ed., Cold Spring Harbor Laboratory Press, Cold Spring Harbor, New York, volume 3, appendix B.12</ref> as follows: | ||
For 1 litre of Phosphate-buffered saline (PBS buffer) use:.. | For 1 litre of Phosphate-buffered saline (PBS buffer) use:.. | ||
*Dissolve in 800 ml of distilled H<sub>2</sub>O: | |||
*8 g of NaCl | |||
*0.2 g of KCl | |||
*1.44 g of Na<sub>2</sub>HPO<sub>4</sub> | |||
*0.24 g of KH<sub>2</sub>PO<sub>4</sub> | |||
*Adjust the pH to 7.4 with HCl or NaOH | |||
*Add H<sub>2</sub>O to 1 liter. | |||
Dispense the solution into aliquots and sterilize them by autoclaving (20 min, 121°C, liquid cycle). | Dispense the solution into aliquots and sterilize them by autoclaving (20 min, 121°C, liquid cycle). | ||
Store at room temperature. | Store at room temperature. | ||
[[Category:Buffers]] | [[Category:Buffers]] | ||