Engineering geology: Difference between revisions

wikademia>RedWolf
m disambiguation: mine
wikademia>Vsmith
moved caracteristics & educ. to engineering geologist
Line 7: Line 7:


The methods used by an [[engineering geologist]] in their studies include geologic field [[mapping]] of geologic structures, geologic formations, soil units and hazards; the review of geologic literature, geologic maps, geotechnical reports, engineering plans, environmental reports, stereoscopic [[aerial photograph]], remote sensing data, [[Global Positioning System]] ([[GPS]]) data, topographic maps and [[satellite]] imagery; the excavation, sampling and logging of earth/rock materials in drilled [[borings]], backhoe test pits and trenches, [[fault trenching]], and bulldozer pits; [[geophysical]] surveys (such as [[seismic refraction]] traverses, [[resistivity]] surveys, [[ground penetrating radar]] ([[GPR]]) surveys, [[magnetometer]] surveys, [[electromagnetic]] ([[EM]]) surveys, high-resolution [[sub-bottom profiling]], and other geophysical methods); and other methods. The field work is typically culminated in analysis of the data and the preparation of an engineering geologic report, [[fault hazard]] report or [[seismic hazard]] report, [[geophysical]] report, [[ground water resource]] report or [[hydrogeologic]] report. The engineering geologic report is often prepared in conjunction with a [[geotechnical engineering]] report by a [[geotechnical engineer]]. The report describes the objectives, methodology, references cited, tests performed, findings and recommendations. Engineering geologist provide geologic data on a  topograpic map, [[aerial photograph]], geologic map, and on [[Geographic Information System]] ([[GIS]]) map or other map base.
The methods used by an [[engineering geologist]] in their studies include geologic field [[mapping]] of geologic structures, geologic formations, soil units and hazards; the review of geologic literature, geologic maps, geotechnical reports, engineering plans, environmental reports, stereoscopic [[aerial photograph]], remote sensing data, [[Global Positioning System]] ([[GPS]]) data, topographic maps and [[satellite]] imagery; the excavation, sampling and logging of earth/rock materials in drilled [[borings]], backhoe test pits and trenches, [[fault trenching]], and bulldozer pits; [[geophysical]] surveys (such as [[seismic refraction]] traverses, [[resistivity]] surveys, [[ground penetrating radar]] ([[GPR]]) surveys, [[magnetometer]] surveys, [[electromagnetic]] ([[EM]]) surveys, high-resolution [[sub-bottom profiling]], and other geophysical methods); and other methods. The field work is typically culminated in analysis of the data and the preparation of an engineering geologic report, [[fault hazard]] report or [[seismic hazard]] report, [[geophysical]] report, [[ground water resource]] report or [[hydrogeologic]] report. The engineering geologic report is often prepared in conjunction with a [[geotechnical engineering]] report by a [[geotechnical engineer]]. The report describes the objectives, methodology, references cited, tests performed, findings and recommendations. Engineering geologist provide geologic data on a  topograpic map, [[aerial photograph]], geologic map, and on [[Geographic Information System]] ([[GIS]]) map or other map base.
=='''Characteristics of an Engineering Geologist'''==
1.  '''Observation skills''':  Ability to observe and understand the important physical features, as well as the small, subtle and seemingly unimportant features.  Ability to listen and take good notes.
2.  '''Spatial skills''':  Ability to visualize and draw [[geologic structures]] (for example faults, bedding planes, landslides, jointing, etc.) in 3-dimensions.
3.  '''Problem solving''':  Desire to analyze and solve problems.
4.  '''Scientific curiosity''':  Desire to know the truth regardless of whether or not it agrees with your original idea about something.
5.  '''Open mind''':  Ability to withhold your final judgment until all data has been gathered and analyzed. 
6.  '''Writing and communications''':  Ability to write and communicate geologic and engineering ideas to other geologists, engineers, non-specialists and the public.
7.  '''Math and computer skills''': Ability to quantify and analyze data and results.
8.  '''Team player''':  Ability to work in teams and get along with others.
9.  '''Desire to work outdoors''': The reason why many students become engineering geologists.
10. Professional Ethics:
=='''Education'''==
Education of Engineering Geologists requires a college degree, such as a Bachelors, Masters in [[Geology]], or [[Geological Engineering]]. Course work in [[Geophysics]], [[Seismology]], [[Hydrogeology]], [[Soil Mechanics]], and [[Geotechnical Engineering]] is also helpful. A PhD is required for certain university teaching and research positions and certain governmental positions.


=='''See also'''==
=='''See also'''==
* [[List of publications in geology#Engineering geology| Important publications in engineering geology]]
* [[List of publications in geology#Engineering geology| Important publications in engineering geology]]
[[Category:Geology]]