ATI HPSS: Difference between revisions

No edit summary
Line 4: Line 4:
The sirens have met with sharp criticism from civil defense aficionados for a variety of reasons.
The sirens have met with sharp criticism from civil defense aficionados for a variety of reasons.


*Tone - ATI sirens, with the exception of the most recent models, used a 1000hz [[Sine wave|Sine]] wave, that creates a high pitched tone. In [[San Francisco, California]], however, many of their ATIs have the tone of an old Federal Signal STL-10, which has caused reliability problems as the programmed tones are far too low-pitched for the speakers to handle. More recent ATI units use a improved, lower-pitched tone, which has given adequate results.
*Tone - ATI sirens, with the exception of the most recent models, used a 1000hz [[Sine wave|Sine]] wave, that creates a high pitched tone. More recent ATI units use a improved, lower-pitched tone, which has given adequate results.


*Speakers - Many of San Francisco's ATIs have had blown speakers due to the low pitch STL-10 tone. In reality, no siren speakers can handle such low-pitched sounds, so this may not necessarily be the fault of the speakers used.
*Speakers - In [[San Francisco, California]], many of their ATIs have the tone of an old Federal Signal STL-10, which has caused reliability problems as the programmed tones are far too low-pitched for the speakers to handle. As few speakers can tolerate such low-pitched sounds, this may not necessarily be the fault of the speakers used.
[[Category:Sirens]]
[[Category:Sirens]]