ATI HPSS: Difference between revisions

No edit summary
Line 11: Line 11:


==Problems and criticism==
==Problems and criticism==
The HPSS sirens have drawn some criticism from civil defense aficionados for a number of reasons. Most ATI sirens, with the exception of the most recent models (and the ATI systems used in [[San Francisco, California]]), used a 1000 Hz [[Sine wave|Sine]] wave, that creates a high pitched tone. Some allege that this tone is too high to be distinctly audible against noisy backgrounds, or over acceptable distances. More recent ATI units use a newer, lower-pitched tone, which has so far given adequate results.
The HPSS sirens have drawn some criticism from civil defense aficionados for several reasons. Most ATI sirens, with the exception of the most recent models (and the ATI systems used in [[San Francisco, California]]), used a 1000 Hz [[Sine wave|Sine]] wave tone, which some allege is not sufficiently distinct against very noisy backgrounds, or over acceptable distances. More recent ATI units use a lower-pitched tone which has given adequate results.


In San Francisco, many of their HPSS units have the tones of a Federal Signal STL-10 siren, which was one of the sirens used by San Francisco until the whole siren system was replaced with HPSS systems. This has caused some reliability problems though, as the comparatively deep-pitched growl of these tones can damage the speakers when playing at high volume. However, seeing as few speakers can tolerate such low-pitched sounds at high volume levels anyway, this may not necessarily be the fault of the speakers used.
In San Francisco, many of their HPSS units have the tones of a Federal Signal STL-10 siren, which was one of the sirens used by San Francisco until the whole siren system was replaced with HPSS systems. While this added voice capability to San Francisco's warning network, it has also caused some reliability problems as the comparatively deep-pitched growl of these tones can damage the speakers when playing at high volume. However, seeing as few speakers can tolerate such low-pitched sounds at high volume levels anyway, this may not necessarily be the fault of the speakers used.


==External links==
==External links==