Introduction to Robotics/Electrical Components/Lecture/Teachers: Difference between revisions

wikademia>Whiteknight
wikademia>Whiteknight
Line 63: Line 63:


Resistor values are shown using a special color code. A resistor will have 4 colored bands on it, one of the bands will be gold or silver. To read a resistor, put the gold/silver band on the right. The first two bands on the left are the digits, and the third band is an exponent.
Resistor values are shown using a special color code. A resistor will have 4 colored bands on it, one of the bands will be gold or silver. To read a resistor, put the gold/silver band on the right. The first two bands on the left are the digits, and the third band is an exponent.
To calculate the value of a resistor, we take the first two digits to form a 2-digit number, and we multiply it by 10 to the power of the third band. For instance, if our resistor was:
{{Introduction to Robotics/Resistor|red|green|yellow}}
Then the value of the resistor would be:
:<math>25 \times 10^4 = 250000 = 250k\Omega</math>
The fourth band is a "tolerance" band, or an error code. Silver means the resistor has a 10% error, and gold means the resistor has a 5% error.
{{-}}


== Diodes: 1-way Gates ==
== Diodes: 1-way Gates ==


== Buttons ==
== Buttons ==