About engineering geology: Difference between revisions

Improved details - by author
Additional improvement - by author
Line 2: Line 2:


=='''Geologic Hazards'''==
=='''Geologic Hazards'''==
Typical [[geologic hazards]] evaluated by engineering geologists include fault rupture on seismically active [[faults]], [[seismic]] and [[earthquake]] hazards (ground shaking, liquefiable soils, lurching, lateral spreading, [[tsunamis]] and seiches; [[landslide]], [[mudflow]], [[rock fall]] and [[avalanche]] hazards; [[unstable slopes]] and [[slope stability]];  [[erosion]]; [[slaking]] and [[heave]] of geologic formations; ground [[subsidence]] (such as due to [[ground water]] withdrawal, decomposition of organic soils and [[tectonic]] movement); [[volcanic]] hazards (volcanic [[eruptions]], [[debris flows]], [[earthquakes]] and ash falls); collapsible soils; shallow ground water/seepage; and other types of geologic constraints. Engineering geologists, often working in conjunction with a [[geophysicist]], may evaluate conditions such as the [[excavatability]] of rock and earth materials (known also as [[rippability]]) to assess the need for [[blasting]] during earthwork construction, as well as associated impacts due to [[vibration]] during blasting on projects.  
Typical [[geologic hazards]] evaluated by an [[engineering geologist]] include fault rupture on seismically active [[faults]], [[seismic]] and [[earthquake]] hazards (ground shaking, liquefiable soils, lurching, lateral spreading, [[tsunamis]] and seiches; [[landslide]], [[mudflow]], [[rock fall]] and [[avalanche]] hazards; [[unstable slopes]] and [[slope stability]];  [[erosion]]; [[slaking]] and [[heave]] of geologic formations; ground [[subsidence]] (such as due to [[ground water]] withdrawal, decomposition of organic soils and [[tectonic]] movement); [[volcanic]] hazards (volcanic [[eruptions]], [[debris flows]], [[earthquakes]] and ash falls); collapsible soils; shallow ground water/seepage; and other types of geologic constraints. Engineering geologists, often working in conjunction with a [[geophysicist]], may evaluate conditions such as the [[excavatability]] of rock and earth materials (known also as [[rippability]]) to assess the need for [[blasting]] during earthwork construction, as well as associated impacts due to [[vibration]] during blasting on projects.  


=='''Methods and Reporting'''==
=='''Methods and Reporting'''==


The methods used by engineering geologists in their studies include geologic field [[mapping]] of geologic structures, geologic formations, soil units and hazards; the review of geologic literature, geologic maps, geotechnical reports, engineering plans, environmental reports, stereoscopic [[aerial photograph]], remote sensing data, topographic maps and [[satellite]] imagery; the excavation, sampling and logging of earth/rock materials in drilled [[borings]], backhoe test pits and trenches, [[fault trenching]], and bulldozer pits; [[geophysical]] surveys (such as [[seismic refraction]] traverses, [[resistivity]] surveys, [[ground penetrating radar]] ([[GPR]]) surveys, [[magnetometer]] surveys, [[electromagnetic]] ([[EM]]) surveys, high-resolution [[sub-bottom profiling]], and other geophysical methods); and other methods. The field work is typically culminated in analysis of the data and the preparation of an engineering geologic report, [[fault hazard]] report or [[seismic hazard]] report, [[geophysical]] report, [[ground water resource]] report or [[hydrogeologic]] report. The engineering geologic report is often prepared in conjunction with a [[geotechnical engineering]] report by a [[geotechnical engineer]]. The report describes the objectives, methodology, references cited, tests performed, findings and recommendations.
The methods used by an [[engineering geologist]] in their studies include geologic field [[mapping]] of geologic structures, geologic formations, soil units and hazards; the review of geologic literature, geologic maps, geotechnical reports, engineering plans, environmental reports, stereoscopic [[aerial photograph]], remote sensing data, topographic maps and [[satellite]] imagery; the excavation, sampling and logging of earth/rock materials in drilled [[borings]], backhoe test pits and trenches, [[fault trenching]], and bulldozer pits; [[geophysical]] surveys (such as [[seismic refraction]] traverses, [[resistivity]] surveys, [[ground penetrating radar]] ([[GPR]]) surveys, [[magnetometer]] surveys, [[electromagnetic]] ([[EM]]) surveys, high-resolution [[sub-bottom profiling]], and other geophysical methods); and other methods. The field work is typically culminated in analysis of the data and the preparation of an engineering geologic report, [[fault hazard]] report or [[seismic hazard]] report, [[geophysical]] report, [[ground water resource]] report or [[hydrogeologic]] report. The engineering geologic report is often prepared in conjunction with a [[geotechnical engineering]] report by a [[geotechnical engineer]]. The report describes the objectives, methodology, references cited, tests performed, findings and recommendations.


=='''Characteristics of Engineering Geologists'''==
=='''Characteristics of an Engineering Geologist'''==
   
   
1.  '''Observation skills''':  Ability to observe and understand the important physical features, as well as the small, subtle and seemingly unimportant features.  Ability to listen and take good notes.
1.  '''Observation skills''':  Ability to observe and understand the important physical features, as well as the small, subtle and seemingly unimportant features.  Ability to listen and take good notes.