Rope pump: Difference between revisions

No edit summary
No edit summary
Line 1: Line 1:
A '''rope pump''' is a kind of [[pump]] used in [[Developing country|developing areas]] to raise water from [[Water well|well]]s. Rope pumps consist of a [[Polyvinyl chloride|PVC]] [[Plastic pressure pipe systems|pipe]], and a rope with [[Washer (mechanical)|washers]] attached to it. The water is held in between the washers in the pipe, and is pulled to the surface. Rope pumps are very simple, and can be easily repaired.
A '''rope pump''' is a kind of [[pump]] of which the main or most visible component is a continuous piece of rope, in which the rope is integral in raising water from a [[Water well|well]]. Rope pumps are often used in [[Developing country|developing areas]].  The most common rope pump consists of a [[Polyvinyl chloride|PVC]] [[Plastic pressure pipe systems|pipe]] and a rope.  There are two types of rope pumps, namely valved and valveless.  Valved rope pumps have either flexible valves (often made from rubber) or ridig valves (often metal or plastic [[Washer (mechanical)|washers]].  Rope pumps are cheap to build and easy to maintain.
 
=== Valveless rope pumps ===
 
Valveless rope pumps work on the principle of friction. The rope is dragged at high speed, and water which clings to the rope is dragged up the rope.  Valveless pumps often use a bicycle to produce the required speed.  It is a rather inefficient design but it requires no valves.<ref>http://www.thefarm.org/charities/i4at/lib2/ropepump.htm</ref>
 
=== Valved rope pumps ===
 
==== Using flexible valves ====
 
==== Using rigid valves ====
 


The rope and washer pump is made from a nylon rope, old car tyre and class C pipe or stronger.
The rope and washer pump is made from a nylon rope, old car tyre and class C pipe or stronger.