ATI HPSS: Difference between revisions

No edit summary
Line 4: Line 4:
The sirens have drawn sharp criticism from civil defense aficionados for several reasons.
The sirens have drawn sharp criticism from civil defense aficionados for several reasons.


*Tone - ATI sirens, with the exception of the most recent models (and the ATI systems used in [[San Francisco, California]]), used a 1000 Hz [[Sine wave|Sine]] wave, that creates a high pitched tone. Some allege that this is much too high to be distinctly audible against a noisy background, or over acceptable distances. More recent ATI units use a improved, lower-pitched tone, which has given adequate results.
*Tone - Most ATI sirens, with the exception of the most recent models (and the ATI systems used in [[San Francisco, California]]), used a 1000 Hz [[Sine wave|Sine]] wave, that creates a high pitched tone. Some allege that this is much too high to be distinctly audible against a noisy background, or over acceptable distances. More recent ATI units use a improved, lower-pitched tone, which has given adequate results.


*Speakers - In San Francisco, many of their ATIs have the tone of an old [[Federal Signal]] STL-10, which has caused reliability problems as the programmed tones are far too low-pitched for the speakers to handle. As few speakers can tolerate such low-pitched sounds at high volume, this may not necessarily be the fault of the speakers used.
*Speakers - In San Francisco, many of their ATIs have the tone of an old [[Federal Signal]] STL-10, which has caused reliability problems as the programmed tones are far too low-pitched for the speakers to handle. As few speakers can tolerate such low-pitched sounds at high volume, this may not necessarily be the fault of the speakers used.
[[Category:Sirens]]
[[Category:Sirens]]