ATI HPSS: Difference between revisions

Line 8: Line 8:


==Problems and criticism==
==Problems and criticism==
The sirens have drawn sharp criticism from civil defense aficionados for several reasons.
The sirens have drawn sharp criticism from civil defense aficionados for a few reasons. Most ATI sirens, with the exception of the most recent models (and the ATI systems used in [[San Francisco, California]]), used a 1000 Hz [[Sine wave|Sine]] wave, that creates a high pitched tone. Some allege that this is much too high to be distinctly audible against a noisy background, or over acceptable distances. More recent ATI units use an improved, lower-pitched tone, which has given adequate results.  


*Tone - ATI sirens, with the exception of the most recent models (and the ATI systems used in [[San Francisco, California]]), used a 1000 Hz [[Sine wave|Sine]] wave, that creates a high pitched tone. Some allege that this is much too high to be distinctly audible against a noisy background, or over acceptable distances. More recent ATI units use an improved, lower-pitched tone, which has given adequate results.
In San Francisco, many of their ATIs have the tone of an old [[Federal Signal]] STL-10, which has caused reliability problems as the programmed tones are far too low-pitched for the speakers to handle. As few speakers can tolerate such low-pitched sounds at high volume, this may not necessarily be the fault of the speakers used.
 
*Speakers - In San Francisco, many of their ATIs have the tone of an old [[Federal Signal]] STL-10, which has caused reliability problems as the programmed tones are far too low-pitched for the speakers to handle. As few speakers can tolerate such low-pitched sounds at high volume, this may not necessarily be the fault of the speakers used.


==External Links==
==External Links==